Mijn winkelwagen
Je winkelwagen is leeg.
Het lijkt erop dat je nog geen keuze hebt gemaakt.
Kijk ook eens naar deze artikelen
Subtotaal0,-
Verzending
Totaal0,00
Developed by Schlumberger (now SLB), Pipesim is a steady-state, multiphase flow simulator designed to model, analyze, and optimize oil and gas production systems. From the reservoir sand face to the process facility, Pipesim simulation allows engineers to visualize pressure, temperature, and flow regimes across complex networks.
Optimize your flow. Master Pipesim simulation today. pipesim simulation
Drag and drop icons: Well, node, pipe, separator. Connect them logically. A common mistake is forgetting the wellhead node —you need a point to measure surface pressure. Developed by Schlumberger (now SLB), Pipesim is a
Introduction: The Digital Backbone of Production Engineering In the modern oil and gas industry, the margin between profitability and loss often lies in the efficiency of the extraction and transportation network. As reservoirs deplete and operational environments become more hostile (deepwater, Arctic, unconventional shale), engineers cannot rely on trial and error. They need precision. This is where Pipesim simulation steps in as the industry gold standard. Master Pipesim simulation today
The key to mastery is not just learning the software menus—it is understanding the fluid dynamics, selecting the correct correlations, and continuously validating the model with field data (build a history match). When done right, Pipesim simulation transforms from a "nice-to-have" software into the central nervous system of your production operations. If you are new to Pipesim, start with the SLB training course "Pipesim Fundamentals" (5 days). Download trial cases from the OneDrive repository. Simulate a simple vertical well first, then add a flowline, then a network. By your tenth simulation, you will instinctively know where the pressure drop is hiding and how to fix it.
Default settings often assume perfect insulation. Fix: Calculate the overall heat transfer coefficient (U-value) for your pipe-in-pipe or buried line. A 10% change in U-value can shift hydrate risk by hundreds of meters.
Every flow network must have a source (reservoir pressure/rate) and a sink (separator pressure). Over-constrain the model and it will fail. Start with: Fixed reservoir pressure + Fixed separator pressure .
Het lijkt erop dat je nog geen keuze hebt gemaakt.