Iesp552avi001 Work -

| Parameter | Description | Example Value | |-----------|-------------|----------------| | exposure_us | Camera exposure in microseconds | 5000 | | roi_x, roi_y, roi_w, roi_h | Region of interest for inspection | 100, 150, 640, 480 | | min_confidence | Pattern match threshold (0.0–1.0) | 0.85 | | output_gpio | Digital output pin for reject signal | 3 | Execute iesp552avi001 work manually via the CLI:

http://<IESP552_IP>:8080/work/iesp552avi001

ies-cli debug iesp552avi001 work --level=TRACE --output=/tmp/iesp_trace.log Then monitor in real time: iesp552avi001 work

Example JSON status response:

ies-cli install iesp552avi001.work --target /opt/ies/workflows/ After installation, verify the work ID: | Parameter | Description | Example Value |

ies-cli config iesp552avi001 work --trigger=edge_rising --trigger_pin=GPIO_7 ies-cli start iesp552avi001 work --daemon Real-time status is accessible via the embedded webserver (port 8080):

ies-cli start iesp552avi001 work --input /dev/cam0 --output /var/log/ies_inspect.log For continuous production, set the work to trigger mode: iesp552avi001 work

Introduction In the rapidly evolving landscape of industrial automation and embedded systems, specific alphanumeric identifiers often serve as critical keys to understanding hardware configurations, firmware protocols, or software work orders. One such identifier that has gained traction among engineers, system integrators, and maintenance technicians is iesp552avi001 work .