Highway 09 Ic Datasheet [2026]

| IC Part | Input Max | Current | Dropout | Key Difference | |---------|-----------|---------|---------|----------------| | | 40V | 1.5A | 300mV | Good balance; rugged | | LM7805 | 35V | 1.0A | 2V | Older, higher dropout | | LM317 | 40V | 1.5A | 1.7V | Adjustable only | | LT1086 | 30V | 1.5A | 1.3V | Lower dropout but costly |

For V_OUT = 9V, choose R1 = 1kΩ (from VOUT to ADJ), R2 = ( (9/1.25) - 1 ) × R1 = 6.2kΩ. Result: V_OUT = 1.25 × (1 + 6.2) = 9.0V. highway 09 ic datasheet

A: Likely due to improper output capacitor ESR. Use a 22µF tantalum or a 10µF ceramic plus 1Ω in series as a test. Ensure capacitor is within 20mm of the VOUT pin. | IC Part | Input Max | Current

For the SOP-8 version, pins 5-8 are typically connected to a heatsink pad or left NC. Always verify with the specific manufacturer’s datasheet. 3. Absolute Maximum Ratings Exceeding any of the following ratings will likely destroy the IC. This table is based on typical Highway 09 specifications. Use a 22µF tantalum or a 10µF ceramic