Firmware: Version Xw.v5.6.11

A: Only if you are currently on v5.2.0 or higher. Devices running v4.x or v5.0.x must first upgrade to v5.4.2 (the "bridge release") to update the bootloader.

| Peripheral/Module | Compatibility | Notes | | :--- | :--- | :--- | | Xw-PCIe-4x (NVMe) | Full | Requires a driver reinstall via opkg install xw-nvme-v2 | | Legacy Serial RS-232 (v1) | Partial | Baud rates above 115200 may drop characters. Use v2 daughterboard. | | Xw-WiFi6 Module | Full | Latency improved by 22% | | Third-party Zigbee dongles | None | The new MAC filter rejects non-Xw certified radios. Revert to v5.6.8 if required. | | Xw-CAN Bus interface | Full | Fixed a watchdog timeout bug present in v5.6.10 | To quantify the impact of Firmware Version Xw.v5.6.11, we ran a series of tests on a standard Xw-2080 reference device (2GB RAM, 4-core ARM Cortex-A76). Firmware Version Xw.v5.6.11

Before upgrading, always perform a full configuration backup, verify your hardware revision, and test the firmware in a staging environment. When applied correctly, transforms an aging device into a modern, secure, and efficient edge node. Have you encountered a unique issue with Xw.v5.6.11? Share your experience in the comments below or visit the official support forum at support.xw-tech.com. A: Only if you are currently on v5