At89c2051 Projects ✦ No Sign-up

Store code in EEPROM (external 24C02 via I2C emulation). Project 8: IR Remote Control Receiver (Sony SIRC or NEC) Difficulty: Advanced Components: TSOP38238 IR receiver, IR remote (TV/DVD remote)

pos = 0;

I/O pin control, timing loops. Project 2: 7-Segment Display Counter (0-9) Difficulty: Beginner Components: Common cathode 7-segment display, 8x 220Ω resistors Circuit: Connect segments a-g and DP of the display to P1.0 – P1.7 via 220Ω resistors. Common cathode to GND. Code snippet (lookup table): unsigned char segment[] = 0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90; // Common anode // For common cathode, invert the bits: ~segment[i] & 0x7F void main() unsigned char count = 0; while(1) P1 = ~segment[count]; // active low for common cathode? // Adjust based on your display type. delay_ms(1000); count++; if(count > 9) count = 0; at89c2051 projects

void main() while(1) P1_0 = 0; // LED ON (assuming common cathode) delay_ms(500); P1_0 = 1; // LED OFF delay_ms(500); Store code in EEPROM (external 24C02 via I2C emulation)

Timer interrupts, random number generation, button debouncing. Project 4: Frequency Counter (0-50 kHz) Difficulty: Advanced Components: External TTL signal source, LCD 16x2 (optional via 4-bit mode) Common cathode to GND

Servos require a 50Hz PWM signal with pulse widths from 1ms to 2ms.

Once you master these , you can move to its bigger brother – the AT89S52 (8KB flash, 3 timers, more I/O) – or even to ARM, but the logical foundation remains the same.